Vacuum chamber (15 l) SM-118 - SKB-077

Vacuum Industrial Equipment

Vacuum chamber (15 l) SM-118

14600 RUB

Vacuum chamber for degassing SM-118 (other names - vacuum degasser, vacuum tank for degassing) is designed to remove air bubbles (degassing process) in a mixture of epoxy resin with a hardener or a mixture of silicone before pouring into a mold, which has a beneficial effect on the quality of the finished product products.
Add to cart

Vacuum chamber for degassing SM-118 (other names — vacuum degasser, vacuum tank for degassing) is designed to remove air bubbles (degassing process) in a mixture of epoxy resin with a hardener or a mixture of silicone before pouring into a mold, which has a beneficial effect on the quality of the finished product products.

Features:

  • The lid is made of transparent polycarbonate, which allows you to observe the process inside the chamber. Polycarbonate provides high transparency and, most importantly, does not crack, unlike acrylic glass. Polycarbonate is 8 times stronger than acrylic glass;
  • The 1/4 SAE adapter in the cover allows direct connection to the vacuum pump without additional adapters and auxiliary ball valves;
  • All connecting fittings are located in the lid, which allows you to degas silicone compounds directly in the chamber without additional containers. Also, this arrangement of fittings minimizes the risk of mixture getting into the vacuum hose.

Specifications:

  • Materials: steel, polycarbonate;
  • Volume, l: 15;
  • Maximum volume of degassing compound, l: 5–8;
  • External dimensions, mm: 280×359;
  • Internal overall dimensions, mm: 276×267;
  • Connection dimensions: 1/4 (3/8 upon request) SAE external thread, fitting for a hose with an internal diameter of 10 mm;
  • Vacuum retention, hours not less than: 24;
  • Weight: 6.1 kg.

Completeness:

  • Vacuum chamber — 1 pcs;
  • Operation manual — 1 pcs.

Рекомендации:

  • For convenience and to obtain the best results when degassing the compound, we recommend using a vacuum pump with a built-in check valve, for example the Value VE180N vacuum pump. This pump is capable of creating high residual pressure in a vacuum chamber in 25–35 seconds. and degas the silicone compound for 10–15 minutes;
  • Before working with a vacuum chamber, we recommend that you watch the videos on this page and read the article with instructions for its use.

1 year warranty.

Manufacturer: Russia, SKB-077.