The vacuum trap for resin CM-228 is designed to trap excess resin in the manufacture of products from reinforcing materials (carbon fiber, fiberglass, etc.) using vacuum infusion technology.

A vacuum tank can be used as a degasser (vacuum chamber) to remove air bubbles in a silicone or resin mixture before pouring into a mold. This allows you to cast products with high quality and without defects.

Features:

• The lid is made of transparent polycarbonate, which allows you to observe the process inside the trap. Polycarbonate provides high transparency;
• In the center of the cover there is a collet fitting for installing a conductive tube with an outer diameter of 8 mm. The fitting is pass-through, which allows the tube to be lowered into a disposable container inside the trap;
• The conductive tube used must have an outer diameter of 8 mm.

Specifications:

• Materials: steel, polycarbonate;
• Volume, l: 5;
• External dimensions (L×H), mm: 235×300;
• Internal overall dimensions (L×H), mm: 185×210;
• Connection dimensions: 1/4 SAE external thread, fitting for a hose with an internal diameter of 10 mm;
• Pressure retention, hours, not less than: 24;
• Weight: 3.6 kg.

Completeness:

• Vacuum trap for resin — 1 pcs;
• Operation manual — 1 pcs.

1 year warranty.

Manufacturer: Russia, SKB-077.