Mobile unit for vacuum infusion MVS-21 is equipment designed to capture excess resin during the molding process using the vacuum impregnation method (VARTM, Vacuum Infusion). The system is mobile and easy to use. Unlike the MVS-20 (-01) installation, this system has two vacuum tanks, one serves as a trap, and the second can be used as an auxiliary vacuum trap, degasser or vacuum accumulator, depending on the tasks performed.
Features:
- Automatic maintenance of the specified residual pressure. Ease of adjustment. The set pressure is maintained by turning off the pump by the electronic control unit. When the set pressure is reached, the pump turns off, and when it decreases, the vacuum pump turns on — this allows you to increase the life of the pump, reduce energy consumption and provide the most comfortable working conditions (no noise from a constantly switched on pump);
- High-performance vacuum pumps allowing the production of large-sized products — yachts, large-sized industrial products, etc.;
- Multiple connections to the vacuum resin trap allow for multiple infusions at the same time. The system is equipped with quick-release connections for easy and quick connection;
- Vacuum resin traps and vacuum pumps are located on removable panels, which allows for more convenient and efficient operation of the equipment;
- Equipment MVS-21-01 allows pumps to operate alternately, in pairs or separately, depending on production tasks.
Completeness:
- Trolley, vacuum pump(s) Value;
- Vacuum tanks;
- Pressure gauge(s);
- Electronic vacuum control unit(s);
- Filter(s);
- Hoses;
- Fitting;
- Operation manual.
Options:
On request, the equipment can be equipped with one or two vacuum receivers, each with a volume of at least 100 liters. The receiver is equipped with a quick-release hose connection, wheels for moving around the production area and a convenient handle for carrying.
Specifications:
- Overall dimensions, mm: 500×700×1055
- Number of vacuum traps: 2;
- Vacuum trap volume, l: 20;
- Collets for the conductive tube, mm: 12 (it is possible to install collets for a standard row of tubes with an outer diameter of 8, 10, 12, 14, 15 mm);
- Number of installed collets: 6×2 (up to 8 collets can be installed per resin trap);
- Supply voltage, V: 220.
1 year warranty.
Manufacturer: Russia, SKB-077.
Types for supplied equipment:
|
|
MVS-21 | MVS-21-01 |
|---|---|---|
| Number of vacuum pumps | one, Value VSV-20-020 | two, Value VSV-20-020 |
| Vacuum pump performance, l/min (m3/hour) | 330 (20) | 330×2 (20×2) |
| Residual pressure, mbar | 1,5 | |
| Weight, kg | 65 | 105 |
| Features | The system is equipped with an industrial vacuum pump and control unit | The system is equipped with two industrial vacuum pumps and a control unit. Easy setup of the system allows, depending on the tasks performed, to adjust the operation of the pumps in a variable manner depending on the pressure in the system. This vacuum infusion station in this version is the most convenient technical solution for the production of large-sized composite products. |
| Price, RUB | 200500 | 273100 |
